Windows 10 April 2019 Update Problems And How To Fix Them
Even however the Windows 10 October 2018 Update will be here, might even be experiencing Windows 10 April 2018 Update problems - you’re not the only one if so. Up to 50% of users experienced problems with Windows 10, as well as experts declare that Windows 10 updates certainly are a mess. If you’re running into Windows 10 April 2018 Update problems, we've your back - we gathered up each of the Windows 10 April Update problems and fixes here in this convenient guide.
At this time, most April Update problems are actually fixed, but you may still find a few bugbears waiting for out there. So, if you’re still experiencing April Update problems, don’t worry - we’ll keep this article updated with all of the latest fixes.
Unfortunately, it’s merely a fact of life that things goes wrong following the release of a serious operating system update. The large level of Windows PCs in existence, together with wildly varied configurations, means problems will happen.
How to download and install the Windows 10 April 2018 Update right now
How to solve Windows 10 April 2018 Update installation problems
Many users who used Windows Update to fit the latest Windows update are running into problems. Windows 10 incorporates a built-in troubleshooter that can assist identify any problems. This can also reset the Windows Update app, that can help kickstart set up ..
To accomplish this, go through the Start menu, then click on the cog icon for the left, that can open up the Settings window. Click ‘Update & Security’ then ‘Troubleshoot’. Click on ‘Windows Update’ then ‘Run the troubleshooter’ and refer to the manual, and click on ‘Apply this fix’ in the event the troubleshooter finds an answer.
1. Free up disk space
Some individuals are also experiencing problems the spot that the update process works to get a while, then reaches some point and stops installing the Windows 10 April 2018 Update, reverting to a previous version of Windows 10.
If which doesn't work, therefore you still cannot install the Windows 10 April 2018 Update, you might need to release some space on your own hard drive.
The April 2018 Update requires 16GB of free space to the 32-bit version, even though the 64-bit version needs 20GB for the hard drive where Windows 10 is installed. If you do not have this space on your own hard drive, then this April 2018 Update will fail.
So, one thing you should do if your Windows 10 April 2018 Update install fails should be to check your drive space in Windows Explorer. If it really is running out of space, try typing in "Disk Clean-up" within the search box about the taskbar and select the device disk (the C: drive).
You’ll be known how much space you’ll save.
Click ‘OK’ then simply select the tick boxes from the files you wish to delete. These ought to be safe to eliminate, fresh fruits you can't retrieve them once they're gone. You’ll be known how much space you’ll save. Click ‘OK’ then ‘Delete files’ to clear out the files. If you need to create more space, click ‘Clean up system files’.Once that's done, try downloading and installing the Windows 10 April 2019 Update again.
2. Disable anti-virus software
If you've antivirus software installed, try disabling that before trying to fit the Windows 10 April 2018 Update, as that will fix the condition. You should then enable it and employ it normally once set up . has completed.
You may even should uninstall it temporarily. Just make sure that you just reinstall it as soon as the April 2018 Update installs successfully.
3. Reset the update
If you are always experiencing problems when trying to set up the Windows 10 April 2018 Update, then you can need to reset the update service and try again.
To do that, open the Command Prompt by typing in 'CMD' in the searchbar and right-clicking on 'Command Prompt'. Select 'Run as administrator'.
Once open, type from the following, pressing Enter after each line:
Afterwards, restart your PC and try installing the April 2018 Update again.
4. Install the Windows 10 April 2018 Update via USB
If you’re still experiencing difficulty downloading and installing the Windows 10 April 2018 Update, explore is eating organic installing it at a USB drive.
You’ll require a blank DVD or maybe a USB stick with add set up . files, with at the very least 5GB of spare space. If you don’t employ a spare drive, look into our list from the best USB flash drives 2018.
Download and install the tool, then open it up and agree on the license terms. On the “What do you wish to do?” screen, click “Create installation media for one more PC”, then select ‘Next’. Select the language, edition and 32-bit or 64-bit, then select either ‘USB flash drive’ or ISO file’, determined by whether you’re installing at a USB or from the DVD (select ISO for your latter)
You can download the Windows 10 April 2018 Update 1803 (64-bit) ISO image completely from Microsoft.
There can also be the Windows 10 April 2018 Update 1803 (32-bit) ISO file available if you could have older 32-bit hardware.
Once the tool has formatted and created mobile phone drive, you are able to restart your PC, boot on the drive and install the Windows 10 April 2018 Update over completely from scratch. Our How to setup Windows 10 guide will disclose how.
5. The mystery on the disappearing desktop
We’ve heard some alarming reports of users’ desktops just disappearing. We’ve seen one or two Reddit posts that link this matter to Avast Antivirus - but Avast has arrived out and declared that it has ‘tested it and couldn’t find any problems affecting Avast Antivirus consumers specifically.’ We’re unclear what the root in the problem is, however if you’re an Avast user - you might like to hold off on installing the Windows 10 April 2018 Update until a fix is released. However, in line with a report from Hot Hardware, it looks like Microsoft is blocking the update for just about any machines running Avast.
Fortunately, it appears like the latest windows update, build KB4284835, appears to have fixed it. The update ‘Addresses a challenge that caused it to start up to and including black screen.’ Apparently what causes it was an incompatibility with certain PC tune-up services.
Windows 10 April 2018 Update won’t work towards Alienware laptops
If you could have an Alienware laptop, and also you’re attempting to update, just to get a blunder message saying you might have to “uninstall your laptop” - you’re only some of the one. The Windows 10 April 2018 Update may be blocked on certain Alienware laptops because of bug causing a black screen when waking from sleep mode.
It looks like sixty more complicated than we thought.
If you’re being affected by this challenge, you need to roll back towards the Fall Creators Update. Microsoft has blocked affected Alienware laptops from receiving the update even though it works over a fix. Microsoft initially promised which the fix would show up inside the third week of May, but nearly per month later, and we’re still awaiting an official solution. It looks like sixty more complicated than we thought. Keep waiting, we’ll have a fix eventually.Windows 10 April 2018 Update SSD problems
We've seen numerous reports the Windows 10 April 2018 Update is causing difficulties with certain makes of solid state drives (SSDs). First of all, it became apparent the Windows 10 April 2018 Update was encountering a show-stopping bug with many Intel SSDs, which affected the Intel SSD 600p Series and Pro 6000p Series NVMe drives.
Microsoft and Intel are aware on the issue, and possesses placed a short-term block set up, and after the software giant has implemented a fix, the update is going to be made available for PCs with your SSDs just as before.
We've also heard which the Windows 10 April 2018 Update is additionally experiencing issues with Toshiba SSDs. The affected drives would be the Toshiba XG4 Series, Toshiba XG5 Series and Toshiba BG3 Series, and again a block continues to be put in position.
If you've got one of these drives, and are already hit from this problem, you are able to download Cumulative Update KB4100403, which fixes the issue. If for some reason you are able to’t download this update, Microsoft’s advice should be to reinstall the last update. If you’re stuck, there’s further help given by the company in order to do that here.
PC won't boot after installing the KB4103721 Version 1803 patch for Windows 10 April 2018 Update
Microsoft is working hard to repair bugs within the Windows 10 April 2018 Update, however an up to date cumulative patch, titled KB4103721 Version 1803, which aimed to treat some with the issues found within the update, seems as if it actually causes some problems on certain PCs.
Apparently, after installing the patch, some PCs are not booting, and are also instead simply showing a black screen when started up.
To fix this challenge, you’ll must enter Safe Mode, that will require booting Windows 10 from your USB drive.
To try this, download the Windows 10 April 2018 Update 1803 (64-bit) ISO image completely from Microsoft (or perhaps the Windows 10 April 2018 Update 1803 (32-bit) ISO file if you could have 32-bit hardware).
To produce a bootable USB drive use Microsoft’s Windows USB/DVD Download Tool on another PC.
Then, insert the USB drive to the unresponsive PC and boot from that point (usually done via undergoing BIOS, by pressing the ‘Del’ key on the keyboard whenever your PC activates).Once the USB stick loads the Windows 10 setup wizard, click ‘Next’, then select ‘Repair your computer’. Then visit Troubleshoot > Advanced options > Command Prompt.
When the Command Prompt appears enter in:
Press 'Enter' then close the Command Prompt window, and then click ‘Continue’. Windows 10 should now boot into Safe Mode.
The member with the Community forums who found the bug shows that in Safe mode you available the Command Prompt and type inside following commands:
You can also try:
and:
Now, within the search bar from the Windows taskbar, type ‘System Configuration’. Click the ‘Boot’ tab, then uncheck ‘Safe Boot’ and then click ‘Apply’. This will stop your PC from always booting into Safe Mode.
Once you restart your PC, it must load Windows 10 correctly. Hopefully Microsoft will to push out a much more straightforward fix for this matter soon.
Chrome keeps crashing after installing Windows 10 April 2018 Update
We’ve seen some reports that this Chrome web browser has some difficulty with the Windows 10 April 2018 Update, with many users experiencing crashes while seeking to browse the web.
Microsoft is aware in the problem, but Google hasn’t commented. Fortunately Microsoft has assured us which a fix is incoming, and it must be available on Windows Update now.
Alternatively, a Microsoft spokesperson has suggested that users experiencing freezing needs inputting the subsequent Windows key shortcut to wake the screen: Windows logo key + Ctrl + Shift + B.
Those on Windows tablets with no keyboard can trigger precisely the same command by simultaneously pressing both volume-up and volume-down buttons thrice for two seconds.
Install the 17134.5 update through cumulative update KB4135051 and run the Command Prompt as a possible Administrator and enter:
On-screen keyboard no more works in Windows 10 April 2018 Update
Some people happen to be reporting that if updating to Windows 10 April 2018 Update, their on-screen keyboard, currently in use to type with on the touch-screen device, will no longer works.
To fix this, throw open the Settings app, then check out 'Devices' and then click on 'Typing' from the left-hand menu.
Under 'Touch keyboard' be sure that 'Automatically show the touch keyboard in windowed apps when there’s no keyboard linked to your device' is enabled.
If it really is, try disabling it, then re-enabling it.
You may also must turn it on by using Settings > Ease of Access, then selecting 'Keyboard' and being confident that 'On-Screen Keyboard' is defined to 'On'.
Microphone no more works with Windows 10 April 2018 Update
Some folks have noticed that their Microphone no more works after installing the Windows 10 April 2018 Update. To fix this, head over to Settings and look under 'Privacy' to make certain apps can access the microphone.
ALT + TAB is laggy in games
Some folks have noticed that if you are playing a game after which press ALT + TAB within the keyboard to minimise the sport and return towards the Windows 10 desktop, after that your PC might start to reduce dramatically.
This is very much an issue while using new 'Focus Assist' feature, so head to Settings > System then select 'Focus Assist' and shut off every option.
How to solve Windows 10 April 2018 Update Media Creation Tool problems
The Media Creation Tool is really a handy app produced by Microsoft that allows you to set up the Windows 10 April 2018 Update employing a USB drive or DVD. However, some everyone has encountered problems when you use it.
If the Media Creation Tool gets stuck when you’re wanting to download the Windows 10 April 2018 Update files, try closing and reopening the Media Creation Tool app. Once the app has downloaded the files, quickly disconnect your PC on the network (either take away the Ethernet cable or switch off your Wi-Fi adapter).
The installation should continue (without checking the web for more files) just as soon as it’s complete you may reconnect for the internet. Finally, available Windows Update (Settings > Update & Security > Windows Update) and then click ‘Check for Updates’ to download a final files.
Some individuals are receiving a ‘DynamicUpdate’ error message when you use the Media Creation Tool. To fix this, open File Explorer and check out C:$Windows.~WSSourcesWindowssources.
You should see an app called Setupprep.exe. Double-click it to file for the update program.
How to mend ‘The update isn't applicable in your computer’ error
If you try to put in the Windows 10 April 2018 Update and you receive an error message that reads ‘The update isn't applicable for your computer’, then you’ll have to make sure you have each of the latest Windows updates installed.
To do that go to Settings > Update & Security > Windows Update and then click on ‘Check for updates’. Install all of the updates which can be found, then try installing the Windows 10 April 2018 Update again.
Nvidia GPU settings are missing after installing the Windows 10 April 2018 Update
Some everyone has noticed that their Nvidia graphics card is just not being shown in Windows 10's Device Manager screen, nor are their options to change its settings.
To fix this, download the most recent Nvidia driver update in the GPU maker's website.
How to mend problems that stop Windows 10 April 2018 Update from finishing the install
There’s no more frustrating than seeing an update seemingly install with out a problem, and getting a mistake message on the last moment.
Some individuals are reporting actually seeing ‘Error: We couldn't complete the updates. Undoing changes. Don't shut down your computer’ and ‘Error: Failure configuring Windows Updates. Reverting changes’ messages, which prevent Windows 10 April 2018 Update from finishing the install process.
You can verify what went wrong by head over to Settings > Update & Security > Windows Update and clicking ‘Update history’.
This should explain to you any points that were encountered. Make a note of these, then search the online world for an alternative.
How to uninstall Windows 10 April 2018 Update
If you are always encountering difficulty with the Windows 10 April 2018 Update, or maybe you don't such as changes Microsoft makes, then you'll be able to uninstall the April 2018 Update and revert into a previous version of Windows.
We wouldn’t actually advise carrying this out, perhaps you might miss out on future security updates from Microsoft, however, if you would rather turn back until the many bugs and issues with the Windows 10 April 2018 Update continues to be fixed, then abide by these steps.
First, head to Settings > Update & security > Recovery and click on on 'Get started' under where it says 'Go back towards the previous version of Windows 10'.
A window look asking you why you intend to revert to some previous version. Answer the question (this will assist Microsoft improve future versions of Windows), then click 'No, thanks' on the next window. This is where it asks you if you wish to check for almost any updates.
Click 'Next' for the window that follows, then 'Next' again, making sure you could have your Windows signing in details handy. Finally, click 'Go to earlier build' and also the Windows 10 April 2018 Update will uninstall.
If you delay 10 days to uninstall the Windows 10 April 2018 Update, you could find the option is finished. Unfortunately, the only method to uninstall the April 2018 Update after that should be to perform a fresh install of Windows 10 utilising an ISO file connected with an older version.
