How To Install Windows 10 On External Hard Drive

I have a very Seagate 2TB Expansion desktop External HDD, which I have created 4 partitions, 3 on the 4 partitions are utilized up. Thinking that will probably be cool to have OS about the External. So I want to fit the Windows 10 OS with this external HDD. But whenever I tried to set up Windows 10 straight on the external disk, I get a blunder message proclaiming that windows is not installed on a USB drive or IEE 1394. I was just wondering if it is possible to setup Windows with an external hard disk. If so how can I find the Windows 10 OS installed?"

Install Windows by using an external hard disk drive is not easy for average users.

Have you ever imagined that to use your own Windows 10 OS anywhere you go? As you might know, while it's possible to install Windows upon an external disk drive, anybody can’t install precisely the same to an external hard disk with default settings. Install Windows upon an external harddrive is not always easy for average users. At most times, Windows recognizes and displays the USB hard disk in the installation screen; it doesn’t allow you to fit Windows within the same. When you attempt to put in Windows with an external drive, you will get "Windows can't be installed to the present disk" error. But don’t worry! Here you'll find the complete solution about how to fit Windows 10 while on an external harddrive.

Steps to Install Windows 10 while on an External Hard Drive

Step1. Download EaseUS Partition Master absolve to Format the external harddrive with NTFS and connect it for a computer.

Warning: Formatting partitions will erase every one of the data, please BACK UP the programs and files as appropriate before formatting.

Right-click the hard disk partition and judge "Format partition" -> Choose "NTFS" on the file system drop-down list and then click "OK" -> click "Apply".

Step 2. Click the "Start" button and input CMD inside the search box, then click "cmd.exe" to file for the Windows PowerShell prompt as soon as the Command prompt window appears, input diskpart.

Step 3. Input the command line disk list then press the Enter button, after that the many drives with the host computer will probably be listed. As you can see inside following picture, Disk 1 will be the destination external harddrive for WTG within this example.

Step 4. Enter the command lines inside picture below. This will clean the partition first; a primary partition will likely be created. After that, the rest in the command lines will format the external disk drive and activate the partition onto it. The last step would be to assign the drive letter, have a look at choose E as being the drive letter.

Step 5. Open "Dism.exe" to extract the install.wim file from drive F and move it to E drive (the destination USB harddrive), please talk about the command line inside picture below.

Step 6. Enter the final command line bcdboot e:windows /s e: /f ALL to guarantee the USB hard disk drive bootable. Here ends the full process.